Garmin GPS 500 - Manual (Page 77)

GPS 500 Pilot’s Guide and Reference
SECTION 5
PROCEDURES
5-5
The steps required to set up and fly the approach
are detailed below (refer to Figure 5-8 for the following
steps):
1) Prior to departing KFDK, the destination (KLYH)
is selected using the Direct-to Key or by
creating a flight plan terminating at Lynchburg
Regional.
2) While enroute to KLYH, view the ATIS frequency
from the list on the NAV/COM Page (Section
2.6 and Figure 5-9).
Figure 5-9 NAV/COM Page
3) Press the PROC Key (Figure 5-10) and select
the ‘VOR 04’ approach using the steps outlined
in Section 5.1.
Figure 5-10 Procedures Page
4) From the Transitions Window (Figure 5-11),
select LYH VOR (the IAF). Also, select ‘Load?’
to load, but not activate, the approach.
Figure 5-11 Approach and Transitions Windows
5) Press the PROC Key, select ‘Activate Approach?’
and press the ENT Key to activate the
approach.
190-00181-60 Rev. G