Garmin GPS 500 - Manual (Page 111)

GPS 500 Pilot’s Guide and Reference 6-13
SECTION 6
WPT PAGES
Figure 6-23 Arrivals Window
4) Press the ENT Key. The cursor moves to the
transitions (TRANS) field.
5) Turn the small right knob to display a window
of available transitions (Figure 6-24). Continue
turning the small right knob to select the
desired transition.
Figure 6-24 Transitions Window
6) Press the ENT Key. The cursor moves to the
runway field.
7) Turn the small right knob to display a window
of available runways (Figure 6-25). Continue
turning the small right knob to select the
desired runway.
NOTE: (‘ALL’ may appear in the runway field,
indicating the arrival procedure applies to all
runways. For airports with parallel runways, ‘B’
may appear at the end of the runway designation
to indicate the arrival procedure applies to both
runways.)
Figure 6-25 Runway Window
8) Press the ENT Key. To remove the flashing
cursor, press the small right knob.
190-00181-60 Rev. G