Garmin GPS 500 - Manual (Page 120)

GPS 500 Pilot’s Guide and Reference 6-22
SECTION 6
WPT PAGES
User Waypoint Page Options
The following User Waypoint Page options are available
by pressing the MENU Key:
• View User Waypoint List? - displays a list of all
user waypoints currently stored in memory.
• Delete User Waypoint? - Allows the pilot to delete
the selected waypoint from memory.
• Crossfill? - Allows the pilot to transfer a user
waypoint to another 400/500 series unit (if
installed). Please refer to Sections 5.1 and 10.1
for detailed information on crossfill.
Viewing a list of all user waypoints:
1) From the User Waypoint Page, press the MENU
Key to display the User Waypoint Page Menu.
2) Turn the large right knob to highlight ‘View
User Waypoint List?’ (Figure 6-42) and press
the ENT Key.
Figure 6-42 User Waypoint Page Menu
3) The top of the User Waypoint List indicates the
total number of user waypoints currently used
and available memory. If more user waypoints
are stored than can be displayed on a single
screen, turn the large right knob to scroll
through the User Waypoint List.
4) Press the small right knob to return to the
User Waypoint Page.
Deleting a user waypoint:
1) Select the desired waypoint on the User
Waypoint Page and press the MENU Key to
display the User Waypoint Page Menu.
2) Turn the large right knob to highlight ‘Delete
User Waypoint?’ (Figure 6-43) and press the
ENT Key.
Figure 6-43 User Waypoint Page Menu
3) Press the CLR Key to display a ‘delete waypoint’
confirmation window.
4) With ‘Yes?’ highlighted, press the ENT Key to
delete the selected user waypoint.
190-00181-60 Rev. G