Garmin GPS 500 - Manual (Page 159)

GPS 500 Pilot’s Guide and Reference 8-25
SECTION 8
AUX PAGES
Displaying the map datum:
1) Select ‘Units/Position’ from the Setup Page,
using the steps described at the beginning of
this section.
2) The WGS 84 map datum is displayed (Figure
10-38), this field cannot be changed.
Figure 10-38 Units/Position Page
Setup Page: Date/Time
Displaying local time or UTC:
1) Select ‘Date/Time’ from the Setup Page, using
the steps described at the beginning of this
section.
2) The flashing cursor highlights the time format
field. Turn the small right knob to display a
window of available time formats: Local 12hr,
Local 24hr, or UTC (Figure 8-39).
Figure 8-39 Time Format Window
3) Continue turning the small right knob to select
the desired time format.
4) Press the ENT Key to accept the selection.
190-00181-60 Rev. G