3Com 1100 - Manual (Page 86)

86 C HAPTER 3: W ORKING W ITH THE W EB I NTERFACE
5 To place the port in another VLAN, repeat steps 1 to 4 with that VLAN.
To place a port back in the Available Ports listbox, click the port in the
VLAN Members listbox and click the << Remove button.
The VLAN Members listbox displays two types of port that do not use
802.1Q tagging: untagged ports and VLT tagged ports. These ports
cannot be moved from the VLAN using the VLAN Setup page:
■
To remove an untagged port from a VLAN, change its VLAN allocation
using the Untagged VLAN listbox on the Port Setup page.
■
VLT tagged ports belong to all VLANs. To remove a VLT tagged port
from a VLAN, specify that the port is no longer VLT tagged using the
VLT Tagging listbox on the Port Setup page.
Setting Up Roving
Analysis Ports
You can set up roving analysis ports for the stack using the Roving
Analysis Setup page.
To access the page:
1 Click the Configuration icon on the side-bar.
2 Click the Roving Analysis hotlink. The Roving Analysis Setup page is
displayed as shown in Figure 23 .
Figure 23 The Roving Analysis Setup page