3Com 1100 - Manual (Page 101)

A Quick Guide to the Commands 101
A Quick Guide to
the Commands Table 8 describes the commands that are available in the command line
interface.
Table 8 Command line interface commands
Command What does it do?
logout Exits the current user from the command line
interface.
bridge agingTime Specifies the aging time of the bridge address
on the current Switch unit.
bridge display Displays the bridge information on the current
Switch unit.
bridge
multicastFiltering igmp
Enables and disables IGMP multicast snooping
for all units in the stack.
bridge
multicastFiltering
routerPort addPort
Adds a statically configured router port on any
unit in the stack.
bridge
multicastFiltering
routerPort autoDiscovery
Enables and disables auto-discovery of router
ports for all units in the stack.
bridge
multicastFiltering
routerPort list
Lists all router ports for all units in the stack in
ascending unit/port number order, whether
manually configured, or learned automatically.
bridge
multicastFiltering
routerPort removePort
Removes a router port from any unit in the
stack, whether manually configured, or learned
automatically.
bridge port address add Adds a statically configured MAC address.
bridge port address find Finds a MAC address within the address
databases on all units in the stack.
bridge port address list Displays a list of MAC addresses associated with
the selected port.
bridge port address
remove
Removes an individual MAC address.
bridge port detail Displays detailed information about a port on
the current Switch unit.
bridge port stpCost Sets the spanning tree path cost on a port on
the current Switch unit.
bridge port stpFastStart Enables and disables spanning tree Fast Start on
a port on the current Switch unit.
bridge port summary Displays summary information about a single
port, or all ports on the current Switch unit.