Modifying a vlan – 3Com 1100 User Manual

Page 118

118

HAPTER

4: W

ORKING

ITH

THE

OMMAND

INE

NTERFACE

The following prompt is displayed:

Select VLAN ID (1-4094) [1]:

2 Enter the VLAN ID that you wish to display.

The detailed VLAN information for the selected VLAN ID is displayed as
shown in the example below.

Immediately after creating a VLAN, the VLAN based counters will only
count for ports local to the unit where the VLAN was created. In order for
ports in other units to contribute to the VLAN counters, a reset of the
stack is required.

Modifying a VLAN

You can modify the VLAN name for a specified VLAN ID using the

modify

command on the VLAN menu.

To modify a VLAN name:

1 At the Top-level menu, enter:

bridge vlan modify

The following prompt is displayed:

Select VLAN ID (1-4094) [1]:

2 Enter the VLAN ID that you wish to modify.

The following prompt is displayed:

Enter VLAN Name [VLAN 3]:

3 Enter the new VLAN name. The default option is the current VLAN name

for the specified VLAN ID.

VLAN ID: 1

Local ID: 1

Name: Default VLAN

Unit Ports
1

1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13

1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14

Unicast Frames:

18564

Octets:

4989235

Multicast Frames:

28157

Broadcast Frames:

Select menu option: