Enabling and disabling spanning tree on a bridge, Adding a port to a vlan, Creating a vlan – 3Com 1100 User Manual

Page 116

116

HAPTER

4: W

ORKING

ITH

THE

OMMAND

INE

NTERFACE

Enabling and

Disabling Spanning

Tree on a Bridge

You can enable or disable spanning tree on a bridge of the current Switch
unit using the

stpState

command on the Bridge menu.

To enable or disable spanning tree on a bridge:

1 At the Top-level menu, enter:

bridge stpState

The following prompt is displayed:

Enter new value (disable, enable) [disable]:

2 Enter

enable

disable

Adding a Port to a

VLAN

You can add a single port to a VLAN, or add all ports on the current
Switch unit to the selected VLAN using the

addPort

command on the

VLAN menu.

To add a port to a VLAN:

1 At the Top-level menu, enter:

bridge vlan addPort

The following prompt is displayed:

Select VLAN ID (1-4094) [1]:

2 Enter the number of the VLAN ID that you wish to add a port to.

The following prompt is displayed:

Enter port (1-12, all):

3 Enter the port number to be added to the VLAN, or enter

all

for all ports

on the current Switch unit to be added.

The following prompt is displayed:

Enter tag type (none, 802.1Q):

4 Enter the tagging information for the port added to the VLAN.

Creating a VLAN

You can create a VLAN using the

create

command on the VLAN menu.

To create a VLAN:

1 At the Top-level menu, enter:

bridge vlan create