3Com 3800 User Manual
Page 92
5-14
C
HAPTER
5: V
IRTUAL
LAN
S
(VLAN
S
)
■
Status for each port
■
Enabled/disabled
■
Tagged/untagged
■
Protocol information
■
IP address
■
STPD information
Sample output from this command is as follows:
3C16910:7 # sh vlan all
VLAN "Default" created by user
Tagging:
802.1Q Tag 1
IP:
192.207.37.214/255.255.255.0
STPD:
Domain "s0" is not running spanning tree protocol.
Protocol:
Match all unfiltered protocols.
Ports:
23. (Number of active port=1)
Untag: 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
21 22 23 24 25
VLAN "green" created by user
Tagging:
802.1Q Tag 11
IP:
Not configured
STPD:
Domain "s0" is not running spanning tree protocol.
Protocol:
Match all unfiltered protocols.
Ports: 3. (Number of active port=0)
Untag: 1 2
Tagged: 7
To display protocol information, use the following command:
show protocol {
SW3800.BK Page 14 Tuesday, May 5, 1998 5:20 PM