3Com 3800 - Manual (Page 124)

8-12 C HAPTER 8: IP U NICAST R OUTING
Displaying Router
Settings To display settings for various IP routing components, use the
commands listed in Table 8-5.
Table 8-5 Router Show Commands
Command Description
show ip config {vlan | all} Displays configuration information for one or more VLANs,
including the following:
■
IP address, subnet mask
■
IP forwarding information
■
BOOTP configuration
■
VLAN name, VLANid
■
Global ICMP configuration
■
Global router advertisement configuration
show ip stats {vlan [ | all]} Displays IP statistics for the CPU of the Switch.
show iparp {
| all | permanent}
Displays the IP Address Resolution Protocol (ARP) table. You
can filter the display by IP address, VLAN, or permanent
entries. Each entry displayed includes the following:
■
IP address
■
MAC address
■
Aging timer value
■
VLAN name, VLANid, and port number
■
Flags
show ipfdb { |
vlan | all}
Displays the contents of the IP forwarding database table.
Used for technical support purposes.
show iproute vlan { | all |
permanent | }
Displays the contents of the IP routing table.
show rip {vlan | all} Displays RIP configuration and statistics for one or more
VLANs. Display includes the state for RIP settings, and
interface states. Statistics include the following:
■
Packets transmitted
■
Packets received
■
Bad packets received
■
Bad routes received
■
Number of RIP peers
■
Peer information
(continued)
SW3800.BK Page 12 Tuesday, May 5, 1998 5:20 PM