3Com 3800 - Manual (Page 61)

Switch 3800 Commands 4-7
General Switch
Commands
Table 4-4 describes general Switch commands.
Table 4-4 General Switch Commands
Command Description
show switch Displays the current Switch information, including:
■
sysName, sysLocation, sysContact
■
MAC address
■
current date and time, and system uptime
■
operating environment (temperature, fans, and
power supply status)
■
NVRAM image information (primary/secondary
image, date, time, size, version)
■
NVRAM configuration information
(primary/secondary configuration, date, time, size,
version)
■
Scheduled reboot information
■
System serial number and reworks indicator
■
Software platform
■
System ID
■
Power supply and fan status
show version Displays the hardware and software versions currently
running on the Switch. Also displays the Switch serial
number.
show memory Displays summary system configuration and memory
utilization statistics for the CPU system DRAM.
reboot Allows you to reboot the Switch. The Switch will ask for
confirmation and then reboot.
config time Allows you to configure the system date and time. The
format for is:
mm/dd/yyyy hh:mm
The time uses a 24-hour clock format.
(continued)
SW3800.BK Page 7 Tuesday, May 5, 1998 5:20 PM