3Com 3800 User Manual
Page 126
8-14
C
HAPTER
8: IP U
NICAST
R
OUTING
disable rip {vlan
Disables RIP for one or more VLANs. When RIP is disabled, the
parameters are not reset to their defaults, and the states are not
cleared.
Disables RIP for a VLAN causes all routes learned from that VLAN
to be advertised with a GarbageTime metric of 16, before being
deleted from the route table.
disable rip aggregation
Disables the RIP aggregation of subnet information on a RIP
version 2 interface.
disable rip splithorizon
Disables split horizon.
disable rip poisonreverse
Disables poison reverse.
disable rip triggerupdate
Disables triggered updates.
disable rip exportstatic
Disables the filtering of static routes.
unconfig icmp
Resets all ICMP settings to the default values.
unconfig irdp
Resets all router advertisement settings to the default values.
unconfig rip {vlan
Resets all RIP parameters to the default VLAN. Does not change
the enable/disable state of the RIP settings.
Table 8-6 Router Reset and Disable Commands (continued)
Command
Description
SW3800.BK Page 14 Tuesday, May 5, 1998 5:20 PM