3Com 3800 - Manual (Page 112)

7-14 C HAPTER 7: S PANNING T REE P ROTOCOL (STP)
Disabling and
Resetting STP To disable STP or return STP settings to their defaults, use the
commands listed in Table 7-2.
CAUTION: If you ignore warnings and delete an STPD without
removing all of its VLAN members first, those VLANs will also be
deleted.
Table 7-2 STP Disable and Reset Commands
Command Description
delete stpd Allows you to remove an STPD. An STPD can only be
removed if all VLANs have been deleted from it.
disable stpd [ | all] Allows you to disable the STP mechanism on one or all
STPDs.
disable stpd port Allows you to disable STP on one or more ports.
unconfig stpd { | all} Allows you to restore default STP values to one or all
STPDs.
SW3800.BK Page 14 Tuesday, May 5, 1998 5:20 PM