Xerox 4213 - Manual (Page 94)

XES COMMAND LANGUAGE MODE
Where to place it Immediately before the beginning of the line for which the new
spacing is intended (preferably, at the end of the previous line).
Example To produce:
Text printed in this font with normal, single
spacing looks like this.
Entering a Line Spacing command with
a parameter of 2 will cause text to double
space like this.
Enter a Line Spacing command with a parameter of
0 to return text to normal,single spacing.
Enter:
Text printed in this font with normal,single L
spacing looks like this. E i2 L
Entering a Line Spacing command with L
a parameter of 2 will cause text to double L
space like this. E i0 L
Enter a Line Spacing command with a parameter L
of 0 to return text to normal,single spacing. L
More Overstriking of characters may occur when half line spacing is
selected; it may also occur if a line is placed using a Vertical Tabs,
Text Placement Relative, or Text Placement Absolute command.
Line Spacing Absolute
Purpose Adjusts the amount of spacing between lines of text. Unlike Line
Spacing, which is font based, Line Spacing Absolute adjusts
spacing pixel by pixel.
Syntax
E ipn L
ip Instruction for interline spacing.
n The new line spacing expressed in pixels (1/300th inch or
.08 mm).
L Line end.
2-56 XEROX 4213 LASER PRINTER PROGRAMMER REFERENCE