Xerox 4213 - Manual (Page 198)

LJ SERIES 2D EMULATION
Spacing
Purpose The Spacing command instructs the printer to accept
proportionally-spaced or fixed-pitch fonts. If proportional
spacing is selected but no proportionally-spaced font is available,
the printer will designate a fixed-pitch font instead. Separate
commands exist for selecting the spacing mode of the primary
and secondary fonts.
Syntax
E (s#P
The Spacing command for the secondary font is:
E )s#P
where # = 0 sets fixed pitch
# = 1 sets proportional spacing.
Example To select the primary for as proportional and the secondary font
as fixed-pitch, enter the following commands:
E (s1P
Hex 1B 38 73 31 50
Dec 27 40 115 49 80
and
E )s0P
Hex 1B 29 73 30 50
Dec 27 41 115 48 80
Pitch
Purpose The Pitch command selects the character spacing of fixed-pitch
fonts in characters per inch (cpi). If the pitch requested is
unavailable, the printer searches for the next size up; failing that,
the next size down. There are separate Pitch commands for the
primary and secondary fonts.
3-38 XEROX 4213 LASER PRINTER PROGRAMMER REFERENCE