Xerox 4213 - Manual (Page 59)

XES COMMAND LANGUAGE MODE
Paper Tray
Purpose Selects a paper source other than the default.
Syntax
E cn
c Instruction for tray selection.
n Indicates tray selection in table 2-2:
Where to place it Before any printable data on the page. If Paper Tray is entered
within the printable contents of the page, it will take effect on
the next page.
Example To print from Tray 1, enter:
E c1
More Entering Paper Tray overrides any selections made through the
Emulation Menu for Paper Source and Auto Tray. With Paper
Tray, when the selected paper tray is empty the printer stops and
waits for the specified paper tray to be filled again.
Table 2-2. Physical and logical paper tray selections
Physical paper tray
Logical paper tray
command:
E cn
HCF (optional high-
capacity feeder), 1, 2 n=0
1 n=1
2 n=2
HCF n=3
1 n=4
1, 2 n=5
HCF, 2 n=6
HCF, 1 n=7
Bypass n=9
XEROX 4213 LASER PRINTER PROGRAMMER REFERENCE 2–21