Xerox 4213 - Manual (Page 78)

XES COMMAND LANGUAGE MODE
If you enter a change of setting within the printable contents of a
page and the new setting for the bottom margin is below the
current text position, the bottom margin goes into effect for the
next page.
Setting illogical margins, (such as a top margin below a bottom
one), or setting margins out of page boundaries causes the
printer to revert to the default margins.
If the printer receives several Margins commands while
formatting a page, the last command it receives will be used on
the next page.
Text placement restrictions on the 4213 printer
The following restrictions apply to page boundaries on the 4213
printer:
• Any text printing beyond the bottom edge of the paper is
printed on the next page.
• Any character printing beyond the right edge of the paper is
not printed.
Margins
Purpose Sets all four margins for a page.
Syntax
E mH,T,B,L,R L
m Instruction to set margins.
H,T,B,L,R Margin values in units of either five pixels (1/60th
inch or .42 mm) or one pixel (1/300th inch or .08
mm), with commas to separate values.
H Height of the page. The distance between the top
edge and the bottom edge of the page.
T Top margin. The distance from the top edge of the
page to the baseline of the characters in the first
line of text.
B Bottom margin. The distance from the bottom
edge of the page to the baseline of the last line of
text.
2-40 XEROX 4213 LASER PRINTER PROGRAMMER REFERENCE