Xerox 4213 - Manual (Page 238)

INDEX f=FIGURE; t=TABLE
C
cable length, 1-1 t
centreing, 2-52
character formatting, 2-68
commands
ignored by the 4213, XES, E-1 t
macro, 3-60 to 3-62
to avoid on the 4213, XES, E-2 t
Canadian EME regulations, iii
cancelling User-Defined Key, 2-7
Cannon connector, 1-13
capacity for graphic windows, 2-84
Carriage Return (CR), 3-34, D-1
cartridge fonts, 3-9
Centre, 2-54
centreing and justifying between margins, 2-52
Centronics
connector, 1-3
interface, 1-1
connector, 1-3 f
voltage and current requirements, 1-7 t
signals and pin assignments, 1-4 to 1-5
signal timing and voltage levels, 1-6
certification, approvals, iii
changing placement for a magnified window, 2-86 f
channel baud options, 4-4
Channel select, E-1 t
character
codes on the Xerox 4213, 2-107 to 2-108
final parameter, 3-11
formatting, 2-68
group, 3-10
parameter, 3-11
variable sequence, 3-10
Character Code, 3-49 to 3-50
tables, A-1 t to A-21 t
Character Descriptor and Data, 3-50
character pitch, conversion table
1/60-inch units to 12-pitch characters, B-9 t
1/60-inch units to 10-pitch characters, B-10 t
1/300-inch units to 12-pitch characters, B-11 t
1/300-inch units to 10-pitch characters, B-12 t
Character Reassignment, 2-112 to 2-113
characteristics
fonts, 3-1 to 3-9
font selection, 3-5 to 3-9
graphic window, 2-79 to 2-81
Character Spacing Absolute, E-2 t
Cinch DB-25P connector, 1-13
class B, iii
Clear Horizontal Margins, 3-23
code
assignments
ASCII, D-3 t
EBCDIC, D-5 t
ISO, D-4 t
mappings tables, A-1 to A-21
numbers, typefaces, 3-43 t
coding schemes, supported, 2-108
combining escape sequences, 3-12 to 3-13 f
command
job control, 2-4
mode change, 2-2
simple, 2-5
printed output, 2-6
structure, PCL4, 3-9 to 3-13
syntax, 2-3
user-entered variables, 2-5
commands in printed output, 2-6
Comment, 2-28 to 2-29
compatibility, font, 3-1
completed table download record, 2-118 f
Complex Print, E-1 t
conductors, number of, 1-1 t
configuring 4213 for XES commands 2-1 to 2-5
connector
Amphenol 36-pin, 1-3
Cannon, 1-13
Centronics interface, 1-3 f
Cinch DB-25P, 1-13
DataProducts, 1-8
RS232C (serial), 1-13 f
constant page
creating, 2-74
merging, 2-76
control codes, 2-108, 3-9
for cursor positioning, 3-34 to 3-35
serial interfaces, D-1 t to D-2 t
conventions used in this manual, xxi to xxii
conversion tables
character pitch, B-9 t to B-12 t
inches, B-2 t to B-4 t
millimetres, B-5 t to B-8 t
units of measure, B-1 to B-12 t
converting User-Defined Key to printable character,
2-6 to 2-7
INDEX-2 XEROX 4213 LASER PRINTER PROGRAMMER REFERENCE