Xerox 4213 - Manual (Page 24)

INTERFACES
Centronics interface
Select the Centronics parallel interface
Centronics parallel interface is selected through the User
Interface.
1. Press the Online H button.
2. Press the Menu A button.
3. Press the Last Page C button until HOST INTERFACE appears
4. Press theTest B button.
5. Press the Last Page C button until PARALLEL CENT appears.
6. Press the Select D button to select Centronics parallel.
Select metered data
With PARALLEL CENTR appearing on the User Interface:
1. Press the Test B button. METERED DATA appears on the User
Interface.
2. Press the Test B button.
3. Press the Last Page C button to scroll through the two
choices of DISABLED OR ENABLED. Disabled is the factory
default.
4. Press the Select D button when your choice appears on the
User Interface.
Return to print mode
Press the Online H button to return the 4213 to Print Mode.
1-2 XEROX 4213 LASER PRINTER PROGRAMMER REFERENCE