Zoom ADSL X6v - Manual (Page 97)

Setting Description
Sent V1 Send Version 1: Send RIP information
to other RIP-enabled devices.
Sent V2 Send Version 2: Send RIP Information
to other RIP-enabled devices.
Using the Ethernet
Configuration Settings
Do I need to change my Ethernet settings?
The Ethernet Configuration page contains information about the
Ethernet ports on your ADSL modem. Typically you should not
need to change these settings. However, if you are having problems
establishing your Ethernet connection, you may need to change the
Speed/Duplex value to match that of the Ethernet NIC in your
computer. Here is a picture of the Ethernet Configuration page:
The following table describes the Ethernet Configuration settings.
If you change any of the settings, click Save Changes, and then
Write Settings to Flash.
Chapter 6: Using Router Setup 97