Zoom ADSL X6v - Manual (Page 129)

TR-069
The TR-069 option opens the Configure CWM Parameters page,
where you can allow an Access Control Server (ACS) to control
and configure your X6v. CWM stands for the CPE WAN
Management protocol.
This feature must be supported by your service provider and
should be used only if the provider instructs you to enable it.
Setting Description
CWM Status When set to true, enables the CWM
protocol. When set to false (the
default), disables CWM.
Configure
Management Server
Page
Opens the page where you set
parameters for the ACS server you are
connecting to.
After you make changes on the Configure Management Server
Page, click Save Changes, then Write Settings to Flash.
Chapter 6: Using Router Setup 129