Zoom ADSL X6v - Manual (Page 154)

ADSL X6v User Guide 154
in the boxes provided. Click Save Changes and
Write Settings to Flash.
b If you manually configured your modem, open the
ADSL Setup page, ensure that MANUAL is
selected, and then enter the correct Username
and Password in the boxes provided. Click Save
Changes and Write Settings to Flash.
¾ Verify that your service provider’s DSL connection is
functioning properly. (Place a call to your service
provider’s customer support department to verify this.)
¾ Windows users only: Verify that the Web browser on the
computer on which you installed the software is
configured for a network connection (this might be
called a Local Area Network or broadband connection).
If you need help configuring your Web browser, refer to
Appendix E: Configuring Your Web Browser on
page 158.
¾ Verify that your TCP/IP network settings are properly
configured on your computer. To do this, refer to the
appropriate section.
• If you are using Macintosh, see Macintosh
TCP/IP Settings on page 147.
• If you are using Linux, see Linux TCP/IP Settings
on page 149.
• If you are using Windows, see Windows TCP/IP
Settings on page 150
Problem
My X6v's DSL light continually flashes and does not stay solidly lit.
Solution
There are several issues that could cause this problem. Check these
items:
ƒ
Ensure that the phone cord is firmly plugged into the wall jack
and the DSL jack on the back of the X6v (not the PHONE
jack on the back of the modem).