ZyXEL Communications Prestige 28641 - Manual (Page 98)

84 Novell IPX Configuration
configured to receive an incoming call, you can configure the default
dial-in parameters in menu 13 (see Chapter 6).
1. Route - Make sure IPX is among the protocols in the Route field.
2. Edit IP/IPX/Bridge - Press the space bar to change it to Yes and
press Enter to go to the network layer options menu.
Figure 8-4 Menu 14.1 - Edit Dial-in User
3. Dial-On-Query - This field is necessary for the Prestige on the
client side LAN. When set to Yes, any Get Service SAP or RIP
broadcasts coming from the LAN will trigger the Prestige to make a
call to that Remote Node. If it is set to No, the Prestige will not
make the outgoing call.
4. Rem LAN Net # - In this field, enter the internal network number
of the NetWare server on the remote side LAN. The Prestige will
create a route to access this server.
5. My WAN Net # - In this field, you can enter in the WAN network
number of the device that you are connecting to. This number will
be used for negotiation between the Prestige and the remote device.
If you leave this field as 00000000, the Prestige will select the
greater WAN network number between the two devices.