beautypg.com

Lan-to-lan application, Remote node setup – ZyXEL Communications Prestige 28641 User Manual

Page 97

background image

Novell IPX Configuration 83

Once you have completed filling in the Menu 3.3, press ENTER the
save message to save your selections, or press ESC at any time to
cancel your selections.

LAN-to-LAN Application

A typical LAN-to-LAN application is to use the Prestige to call from a
branch office to headquarters such that all of the stations on the branch
office network have access to the server at the headquarters, as
depicted in the following diagram:

Figure 8-3 LAN-to-LAN application

For the branch office, you need to configure a Remote Node in order to
dial out to headquarters.

Remote Node Setup

Follow the procedure in Chapter 5 to fill the protocol-independent
parameters in Menu 11, Remote Node Profile. For the protocol-
dependent parameters, follow the ensuing instructions. If the Prestige is