ZyXEL Communications Prestige 28641 - Manual (Page 37)

Installation 23
•
U interface - This allows you to connect directly to your ISDN
wall jack.
O N
OTE
: T
HE
ISDN
JACK IS FOR
ISDN
LINE CONNECTION ONLY
. C
ONNECTION OF A
PHONE LINE MAY RESULT IN DAMAGE TO YOUR
P
RESTIGE
.
A
TTENTION
: L
A FICHE
ISDN
EST DESTINÉE UNIQUEMENT POUR LA CONNEXION SUR UNE
LIGNE
RNIS. L
A CONNEXION SUR UNE LIGNE TÉLÉPHONIQUE PEUT
ENDOMMAGER VOTRE ADAPTATEUR DE TERMINAL
.
Connecting a Telephone/Fax to your Prestige
You can connect a regular telephone, a fax machine or a modem to
your Prestige to be used for analog calls. It should be noted that this is
optional and is not required for you to run other applications using your
Prestige.
Plug one end of the telephone cord from a phone or fax or modem into
the socket on the rear panel of the Prestige labeled PHONE.
In order to receive incoming calls using a device connected to the
PHONE port, you need to enter Voice in the Analog Call field under
the desired telephone number (e.g., 1st phone #) in SMT Menu 2 -
ISDN Setup. See Collecting ISDN Phone Line Information in Chapter
2 for more details.
Connecting an Ethernet Cable to your Prestige
The Prestige supports two types of Ethernet connections. The
connection procedure differs for each one; follow the one that is
appropriate for your installation.
•
UTP
The UTP port is used to connect to a 10Base-T network. 10Base-T
networks use Unshielded Twisted Pair (UTP) cable and RJ-45