ZyXEL Communications Prestige 28641 - Manual (Page 134)

120 System Maintenance
Figure 14-2 Example of Menu 24.1 - System Maintenance - Status
1. To get to the System Status, select option 24. System Maintenance.
This will bring you to Menu 24 - System Maintenance.
2. From this menu, select option 1. System Status.
3. There are four (4) possible commands in Menu 24.1 - System
Maintenance - Status. Entering 1 will disconnect the current B1
channel call; 2 will disconnect the current B2 channel call, 3 will
reset the counters; and ESC will exit this screen.
4. Items 5 - 26 describes the fields present in Menu 24.1 - System
Maintenance - Status. It should be noted that these fields are
READ-ONLY and are meant to be used for diagnostic purposes.
5. ISDN - shows statistics for B1 and B2 channels respectively.
These are the information displayed for each channel:
6. Link - shows the Remote Node the channel is currently connected
to or the status of the channel (Idle, Calling, or Answering).
7. Type - the current connecting speed (56K or 64K).
8. TXPkt - the number of transmitted packets on this channel.
9. RXPkt - the number of received packets on this channel.