ZyXEL Communications Prestige 28641 - Manual (Page 96)

82 Novell IPX Configuration
Figure 8-2 Menu 3.3 - Novell IPX Ethernet Setup
1. Seed Router - Determine if the Prestige is to act as a seed router.
This value depends on the existing network. If there is a NetWare
server providing the network number, select No. If there is no
NetWare server providing the network number, select Yes.
2. Frame Type - For every frame type that the Prestige needs to
support, you need to set the corresponding field to Yes. The frame
type(s) selected here must be the same frame type(s) as the server
or client stations on that network. Otherwise, the devices will not be
able to communicate. You can select one or more of these four
frame types:
•
802.2
•
802.3
•
Ethernet II
•
SNAP
3. IPX Network # - If you selected the Prestige to act as a seed
router, you need to provide a unique network number to be
associated with the network that the Prestige has joined. Keep in
mind that this number must not be used anywhere else on the entire
internetwork.