beautypg.com

Command interpreter mode – ZyXEL Communications Prestige 28641 User Manual

Page 144

background image

130 System Maintenance

Figure 14-9 Example of uploading RAS using PCPLUS

ISDN code update - Type ‘atrs’, ‘atis’, and then ‘atupx’ at the
command prompt before uploading the new firmware (upload
procedure varies depending on the type of software used to access
the Prestige). You must use the XMODEM protocol to perform the
upload. After uploading is successful, power off the Prestige, and
then power it back on to restart.

Command Interpreter Mode

This option allows the user to enter the command interpreter mode. This
mode allows you to diagnose, test, and configure your Prestige using a
specified set of commands. A list of valid commands can be found by
typing help at the command prompt. For more detailed information,
check the ZyXEL Web site or send email to the ZyXEL Support
Group.