ZyXEL Communications Prestige 28641 - Manual (Page 62)

48 Configuring for Internet Access
Configuration for Single User Account
The steps for configuring your Prestige for Single User Internet Access
are identical to conventional Internet Access with the exception that you
need to fill in three extra fields.
Follow steps 1-8 from the previous section, Internet Access
Configuration.
1. Single User Account - Enter Yes to enable the Single User
Account feature. Use the space bar to toggle between Yes and No.
2. Single User Account: IP Addr - If your ISP assigns you a
dynamic IP address, enter 0.0.0.0 here. If your ISP assigns you a
static IP address enter that IP address here.
3. Single User Account: Server IP Addr - If you want to make a
single server, e.g., a Web server, accessible to outside users, enter
that server’s IP address here.
Press ENTER at the message: Press ENTER to Confirm ... to
confirm your selections or press ESC at any time to cancel your
selections.
At this point, the Prestige will ask if you wish to test the Internet
connection. If you select Yes, the Prestige will call the ISP to test
the Internet connection. If the test fails, note the error message that
you receive and take the appropriate troubleshooting steps.
Configuring Backup ISP Accounts
Sometimes it may be desirable to configure more than one ISP account
for backup purposes. The Single User Account feature can be enabled
for all of these accounts, making it convenient to switch Internet Service
Providers in the event of a failure.
To configure a backup ISP,