ZyXEL Communications Prestige 28641 - Manual (Page 136)

122 System Maintenance
25. LAN Packet Which Triggered Last Call - shows the first 48
octets of the LAN packet that triggered the last outgoing call. There
are three different types of packets: IP, IPX, and RAW. By viewing
the packet information, you can determine which station has sent a
packet to cause the Prestige to make an outgoing call.
Two example figures are shown below. the first of an ICMP Ping
packet (Type: IP) triggering the call and the second with a SAP
broadcast packet (Type: Raw) triggering the call. With this information,
you can determine the source IP address of the packet or the source
MAC address of the packet.
Figure 14-3 LAN Packet Which Triggered Last Call
Terminal Baud Rate
Users can set up different baud rates for the RS-232 connection
through menu 24.2 Terminal Baud rate. The Prestige supports 9600
(default), 19200, and 38400bps for the RS-232 connection.