ZyXEL Communications Prestige 28641 - Manual (Page 44)

30 Installation
Figure 3-6 Menu 1 - General Setup
1. System Name - Choose a descriptive name for the Prestige for
identification purposes, e.g., p2864. This name should be no more
than 8 alphanumeric characters. Spaces are not allowed, but “-”
and “_” are accepted. This name can be retrieved remotely via
SNMP, used for CHAP authentication, and will be displayed as the
prompt in the Command Mode. See Chapter 6 for more
information on CHAP; see Chapter 14 for more information on
Command Mode.
2. Location - Enter the geographic location (up to 31 characters) of
your Prestige, e.g., San Jose.
3. Contact Person’s Name - Enter the name (up to 8 characters) of
the person in charge of this Prestige, e.g., Brent Harper. The
Location and the Contact Person fields are optional.
4. Protocols - Turn on or off the individual protocols for your
particular application. Unsupported protocols will have a N/A in
their fields.