ZyXEL Communications Prestige 28641 - Manual (Page 74)

60 Remote Node Configuration
5. Multiple Link Options: Max Trans Rate - Enter the maximum
data transfer rate allowed for this Remote Node. This parameter is
in kilobits per second. There are two options for this field:
•
64 - At most one channel can be used.
•
128 - A maximum of two channels can be used.
6. Multiple Link Options: Target Utility - Enter the two thresholds
separated by a - for subtracting and adding the second channel. The
default is 32-48.
7. Multiple Link Options: Add Persist - This parameter specifies
the number of seconds there traffic is above the adding threshold
before the Prestige will bring up the second channel. The default is 5
seconds.
8. Multiple Link Options: Subtract Persist - This parameter
specifies the number of seconds where traffic is below the
subtraction threshold before the Prestige drops the second channel.
The default is 5 seconds.
Once you have completed Menu 11.2 - Remote Node PPP Options,
press ENTER at the message: Press ENTER to Confirm ... to confirm
your selections, or press ESC to cancel your selections.