ZyXEL Communications Prestige 28641 - Manual (Page 73)

Remote Node Configuration 59
Editing PPP Options
Figure 5-3 Remote Node PPP Options
1. Encapsulation - Select CCP (Compression Control Protocol) for
the PPP or MP link. There are two options in this field.
•
Standard PPP - Standard PPP options will be used.
•
CISCO PPP - Cisco PPP options will be used.
2. Compression - Turn on the Stac Compression. The default for this
field is Off.
3. Multiple Link Options: BOD Calculation - Select the direction
of the traffic you wish to calculate in order to determine when to
add or subtract a link. The default for this field is Transmit or
Receive.
4. Multiple Link Options: Base Trans Rate - Select the base data
transfer rate for this Remote Node. This parameter is in kilobits per
second (Kbps). There are two options for this field:
•
64 - Only one channel will be used.
•
128 - Two channels will be used when a packet triggers a call.