ZyXEL Communications Prestige 28641 - Manual (Page 48)

34 Installation
19 digits for the number and 5 digits for the Subaddress. The
Subaddress is only applicable to DSS1.
4. Modem & Subaddress - Enter the telephone number and
subaddress assigned to the internal Modem data call for the
Prestige. It will be used as outgoing CGPN(Calling Party Number)
setting for the internal Modem data call.
5. A/B Adapter & Subaddress - Enter the telephone number and
subaddress assigned to the A/B Adapter (POTS port) call for the
Prestige. It will be used as outgoing CGPN(Calling Party Number)
setting for the A/B Adapter call.
6. Dial Prefix to Access Outside Line - Enter the prefix number if
the Prestige is connected to an ISDN PBX. This number will be
added to all outgoing calls and should be no longer than 3 digits.
Otherwise, leave this field blank.
7. PBX Number (with S/T Bus Number) - Enter the S/T bus
number if the Prestige is connected to an ISDN PBX. If this field is
left as blank then the loopback test will be skipped.
8. Incoming Phone Number Matching - There are three options in
this field:
Multiple Subscriber Number (MSN) - The digital call will only
be answered when there is a match for the ISDN data number. The
analog call will be answered as a modem call when there is a match
for the modem number. Or it will be answered as A/B Adapter call
when there is a match for the A/B Adapter number. If no modem or
A/B Adapter number is specified, then the analog call will not be
answered. This option will be available as EAZ (Endgeraete
Auswahl Ziffer) for 1TR6.
Called Party Sub-Address (CDSA) - The digital call will be
answered when there is a match for the ISDN Data subaddress.