ZyXEL Communications Prestige 28641 - Manual (Page 142)

128 System Maintenance
Figure 14-8 Trace Display for a Failed IPCP Connection via Manual Call
1. Internet Setup Test - This test checks to see if your Internet
access configuration has been done correctly. When this option is
chosen, the Prestige will PING the Internet IP Address. If
everything is working properly, you will receive an appropriate
response. Otherwise, note the error message and consult your
network administrator.
2. Ping Host - This diagnostic test pings the host which determines
the functionality of the TCP/IP protocol on your system.
3. Reboot System - This option reboots the system. This serves to
implement any changes that may have been recently added to your
system.
4. Command Mode - This option allows the user to enter the
command mode. This mode allows you to diagnose and test your
Prestige using a specified set of commands.
Backup Configuration
Selecting option 5 from Menu 24 - Maintenance will allow you to
backup your current Prestige configuration onto disk. Backup is highly
recommended once your Prestige configuration is functioning.