ZyXEL Communications Prestige 28641 - Manual (Page 70)

56 Remote Node Configuration
17. Telco Options : Transfer Rate - This field (which only applies to
outgoing calls) controls the rate at which the data is transferred
between your Prestige and the Remote Node. The options for this
field are:
•
64K - The Prestige will place 64Kbps (bits per second) digital
data calls. (Default)
•
Modem - The Prestige will place Modem data calls.
•
X.75 - (for the DSS1 and 1TR6 only) The Prestige will place
X.75 digital data calls.
•
V.120 - (for the DSS1 and 1TR6 only) The Prestige will place
V.120 digital calls.
•
56K - (For the North America only) The Prestige will place
56Kbps digital data calls.
•
DOVBS - (For the North America only) The Prestige will
place 56Kbps Data Over Voice Bearer Service (DOVBS) call.
Some phone companies in North America charge less if calls
are made using DOVBS.
18. Telco Options : Allocated Budget (min) - This field will set a
budget outgoing call time for the Remote Node. The default for this
field is 0 for no budget control.
19. Telco Options : Period (hr) - This field will set the time interval to
reset the above outgoing call budget control.
20. Session Option: Input Filter Sets, Output Filter Sets and Call
Filter Sets - In these fields, select which filter set(s) you would like
to implement to filter the incoming and outgoing traffic between this
Remote Node and the Prestige. You can choose from 12 different
filter sets. In addition, you can link up to 4 filter sets together for
further customization (e.g., 1, 5, 9, 12). Note that spaces and , are
accepted in this field.