ZyXEL Communications LAYER 3 ES-3124 - Manual (Page 65)

ES-3124 User’s Guide
Chapter 5 Initial Setup Example 63
5.1.2 Setting Port VID
Use PVID to add a tag to incoming untagged frames received on that port so that the frames
are forwarded to the VLAN group that the tag defines.
In the example network, configure 2 as the port VID on port 10 so that any untagged frames
received on that port get sent to VLAN 2.
Figure 23 Initial Setup Network Example: Port VID
1 Click Advanced Applications
and VLAN in the navigation
panel. Then click the VLAN
Port Setting link.
2 Enter 2 in the PVID field for
port 10 and click Apply to
save your changes back to the
run-time memory. Settings in
the run-time memory are lost
when the ES-3124’s power is
turned off.