ZyXEL Communications LAYER 3 ES-3124 - Manual (Page 283)

ES-3124 User’s Guide
Chapter 36 Configuration Mode Commands 281
36.4.4.2 no port-access-authenticator
Syntax:
no port-access-authenticator
no port-access-authenticator reauthenticate
no port-access-authenticator
where
An example is shown next.
• Disable authentication on the switch.
• Disable re-authentication on ports one, three, four and five.
• Disable authentication on ports one, six and seven.
Figure 116 no port-access-authenticator Command Example
36.4.4.3 no ssh
Syntax:
no ssh key
no ssh known-hosts
no ssh known-hosts [1024|ssh-rsa|ssh-dsa]
where
An example is shown next.
= Disables port authentication on the switch.
reauthenticate = Disables the re-authentication mechanism on the listed port(s).
= Disables authentication on the listed ports.
ras(config)# no port-access-authenticator
ras(config)# no port-access-authenticator 1,3-5 reauthenticate
ras(config)# no port-access-authenticator 1,6-7
key = Disables the secure shell server encryption key. Your switch
supports SSH versions 1 and 2 using RSA and DSA
authentication.
known-hosts = Removes a specific remote host from the list of all known
hosts.
known-hosts
[1024|ssh-rsa|ssh-dsa] = Removes remote known hosts with a specified public key
type (1024-bit RSA1, RSA or DSA).