ZyXEL Communications LAYER 3 ES-3124 - Manual (Page 247)

ES-3124 User’s Guide
Chapter 34 Introducing Commands 245
kick tcp Resets a TCP connection. Use the
show ip tcp command to get
the Session ID.
13
mac-flush Clears the MAC address table. 13
Removes all learned MAC address
on the specified port(s).
13
erase running-config Resets to the factory default
settings.
13
interface port-
channel
list>
[bandwidth-
limit...]
Resets to the factory default
settings on a per port basis and
optionally on a per feature
configuration basis.
13
baudrate <1|2|3|4|5> Changes the console port speed.
Choices are 1 (9600), 2 (19200),
3(38400), 4 (57600) and 5
(115200).
13
boot config Restarts the system with the
specified configuration file.
13
reload config Restarts the system and use the
specified configuration file.
13
write memory Saves current configuration to the
configuration file the switch is
currently using.
13
Saves current configuration to the
specified configuration file on the
switch.
13
copy tftp flash Restores firmware via TFTP. 13
tftp config Restores configuration with the
specified filename from the
specified TFTP server.
13
running-config
tftp
Backs up running configuration to
the specified TFTP server with the
specified file name.
13
copy running-
config interface
port-channel
list>
Clones (copies) the attributes from
the specified port to other ports.
13
copy running-
config interface
port-channel
list>
[bandwidth-
limit ....]
Copies the specified attributes
from one port to other ports.
13
Table 83 Command Summary: Enable Mode (continued)
COMMAND DESCRIPTION PRIVILEGE