ZyXEL Communications LAYER 3 ES-3124 - Manual (Page 253)

ES-3124 User’s Guide
Chapter 34 Introducing Commands 251
fe-spq
q7>
Sets the switch to use SPQ to
service the subsequent queue(s)
after and including the specified
queue for the 10/100 Mbps
Ethernet ports.
13
ip route Creates a static route. 13
[metric
]
[name ]
[inactive]
Sets the metric of a static route or
deactivates a static route.
13
name-server Sets the IP address of a domain
name server.
13
address default-
gateway
Sets the default gateway's IP
address for the out-of-band
management port.
13
address Sets the IP address and subnet
mask of the out-of-band
management port.
13
mac-
forward
name mac
vlan
interface
Configures a static MAC address
forwarding rule.
13
inactive Disables a static MAC address
forwarding rule.
13
mac-filter name mac
vlan
drop
Configures a static MAC address
port filtering rule.
13
inactive Disables a static MAC address
port filtering rule.
13
mirror-
port
Enables port mirroring. 13
Sets the monitor port (the port to
which traffic is copied for
analysis).
13
lacp Enables Link Aggregation Control
Protocol (LACP).
13
system-priority <1-65535> Sets the priority of an active port
using LACP.
13
trunk
T6>
Activates a trunk group. 13
T6> lacp
Enables LACP for a trunk group. 13
Table 84 Command Summary: Configuration Mode (continued)
COMMAND DESCRIPTION PRIVILEGE