ZyXEL Communications LAYER 3 ES-3124 - Manual (Page 295)

ES-3124 User’s Guide
Chapter 37 Interface Commands 293
• Enable ingress checking on the interface.
37.2.8 frame-type
Syntax:
frame-type
where
An example is shown next.
• Enable ports one, three, four and five for configuration.
• Enable ingress checking on the ports.
• Enable tagged frame-types on the interface.
37.2.9 weight
Syntax:
weight ...
where
An example is shown next.
• Enable WFQ queuing on the switch.
• Enable port two and ports six to twelve for configuration.
ras(config)# interface port-channel 1,3-5
ras(config-interface)# ingress-check
ntagged> = Choose to accept both tagged and untagged incoming frames, just
tagged incoming frames or just untagged incoming frames on a port.
ras(config)# interface port-channel 1,3-5
ras(config-interface)# ingress-check
ras(config-interface)# frame-type tagged
...
= Sets the interface WFQ weighting. A weight value of one to eight is
given to each variable from wt 1 to wt 8 .