ZyXEL Communications LAYER 3 ES-3124 - Manual (Page 249)

ES-3124 User’s Guide
Chapter 34 Introducing Commands 247
no ip Sets the management IP address
to the default value.
13
route Removes a specified IP static
route.
13
route
inactive
Enables a specified IP static
route.
13
igmp-filtering Clears the IGMP filtering settings
on the switch.
13
profile Deletes the IGMP filtering profile. 13
profile
start-address
end-
address
Deletes a rule in the IGMP
filtering profile.
13
igmp-snooping Disables IGMP snooping. 13
mac-forward mac
vlan
interface
Removes the specified MAC
forwarding entry, belonging to a
VLAN group (if any) forwarded
through an interface(s).
13
mac
vlan
interface
inactive
Enables the specified MAC
address, belonging to a VLAN
group (if any) forwarded through
an interface(s).
13
mac-filter mac
vlan
inactive
Enables the specified MAC-filter
rule.
13
mac
vlan
Disables the specified MAC filter
rule.
13
mirror-port Disables port mirroring on the
switch.
13
lacp Disables the link aggregation
control protocol (dynamic
trunking) on the switch.
13
trunk
5|T6>
Disables the specified trunk
group.
13
5|T6> lacp
Disables LACP in the specified
trunk group.
13
5|T6>
interface
Removes ports from the specified
trunk group.
13
bcp-transparency Disables Bridge Control Protocol
(BCP) transparency.
13
storm-control Disables broadcast storm control. 13
Table 84 Command Summary: Configuration Mode (continued)
COMMAND DESCRIPTION PRIVILEGE