ZyXEL Communications LAYER 3 ES-3124 - Manual (Page 243)

ES-3124 User’s Guide
Chapter 34 Introducing Commands 241
34.11.2 Enable Mode
The following table describes the commands available for Enable mode.
[vlan
]
[size <0-1472>]
[-t]
Sends Ping request to an Ethernet device in the
specified VLAN(s) with the specified parameters.
0
help Displays command help information. 0
tracerout
e
Determines the path a packet takes to a device. 0
[vlan ]
[ttl <1-255>]
[wait <1-60>]
[queries <1-10>]
Determines the path a packet takes to a device in a
VLAN.
0
help Displays command help information. 0
ssh <1|2> <[user@]dest-
ip>
Connects to an SSH server with the specified SSH
version.
0
Table 82 Command Summary: User Mode (continued)
COMMAND DESCRIPTION PRIVILEGE
Table 83 Command Summary: Enable Mode
COMMAND DESCRIPTION PRIVILEGE
help Displays help information. 13
logout Exits Enable (or privileged) mode. 13
exit Exits Enable (or privileged) mode. 13
history Displays a list of command(s) that
you have previously executed.
13
enable Accesses Enable (or privileged)
mode.
13
disable Exits Enable (or privileged) mode. 13
configure Accesses Configuration mode.
See Section 34.11.3 on page 246 .
13
stk-port-
test
Tests stack port list. 13
no logging Clears system logs. 13
arp Flushes the ARP (Address
Resolution Protocol) table.
13
interface
number>
Clears the interface status of the
specified port(s).
13
show ip Displays IP related information. 13
arp Displays the ARP table. 13
tcp Displays TCP related information. 13