ZyXEL Communications LAYER 3 ES-3124 - Manual (Page 252)

ES-3124 User’s Guide
250 Chapter 34 Introducing Commands
cluster member Removes the cluster member. 13
mvr Disables MVR on the switch. 13
fe-spq Disables Strict Priority Queuing
on the switch.
13
syslog Disables syslog logging. 13
server
address>
Disables syslog logging to the
specified syslog server.
13
server
address>
inactive
Enables syslog logging to the
specified syslog server.
13
type [type] DIsables syslog logging for the
specified log type ( sys , link ,
config , error or report ).
13
vlan <1-4094> Enters the VLAN configuration
mode. See Section 34.11.5 on
page 263 for more information.
13
vlan-type <802.1q|port-
based>
Specifies the VLAN type. 13
igmp-
snooping
Enables IGMP snooping. 13
host-timeout <1-16711450> Sets the host timeout value. 13
leave-timeout <1-16711450> Sets the leave timeout value 13
unknown-
multicast-frame
Sets how to treat traffic from
unknown multicast group.
13
reserved-
multicast-group
Sets how to treat traffic belonging
to reserved multicast groups.
13
igmp-
filtering
Enables IGMP filtering on the
switch.
13
profile
start-address
end-address
Sets the range of multicast
address(es) in a profile.
13
interface port-channel Enables a port or a list of ports for
configuration. See Section
34.11.4 on page 259 for more
details.
13
spq Sets the queuing method to SPQ
(Strictly Priority Queuing).
13
wfq Sets the queuing method to WFQ
(Weighted Fair Queuing).
13
wrr Sets the queuing method to WRR
(Weighted Round Robin).
13
Table 84 Command Summary: Configuration Mode (continued)
COMMAND DESCRIPTION PRIVILEGE