ZyXEL Communications LAYER 3 ES-3124 - Manual (Page 266)

ES-3124 User’s Guide
264 Chapter 34 Introducing Commands
34.11.6 mvr Commands
The following table lists the mvr commands in configuration mode.
inband-default
dhcp-bootp
release
Releases the dynamic in-band IP
address.
13
inband-default
dhcp-bootp
renew
Updates the dynamic in-band IP
address.
13
inband-default Sets a static in-band IP address
and subnet mask.
13
manageable
Sets the management IP address
and subnet mask of the switch in
the specified VLAN.
13
Sets the IP address and subnet
mask of the switch in the specified
VLAN.
13
default-gateway Sets a default gateway IP address
for this VLAN.
13
Table 86 Command Summary: config-vlan Commands (continued)
COMMAND DESCRIPTION PRIVILEGE
Table 87 mvr Commands
COMMAND DESCRIPTION PRIVILEGE
mvr <1-
4094>
Enters the MVR (Multicast VLAN
Registration) configuration mode.
13
source-port Sets the source port(s).
An MVR source port can send and
receive multicast traffic in a
multicast VLAN.
13
receiver-port Sets the receiver port(s).
An MVR receiver port can only
receive multicast traffic in a
multicast VLAN.
13
inactive Disables MVR settings. 13
mode
ble>
Sets the MVR mode ( dynamic or
compatible ).
13
name Sets the MVR name for
identification purposes.
13
tagged
list>
Sets the port(s) to tag VLAN tags. 13