ZyXEL Communications LAYER 3 ES-3124 - Manual (Page 58)

ES-3124 User’s Guide
56 Chapter 4 The Web Configurator
4.4.1 Change Your Password
After you log in for the first time, it is recommended you change the default administrator
password. Click Management, Access Control and then Logins to display the next screen.
Routing Protocol
Static Routing This link takes you to screens where you can configure static routes. A static route
defines how the switch should forward traffic by configuring the TCP/IP parameters
manually.
DiffServ This link takes you to screens where you can configure DiffServ and DSCP settings.
Management
Maintenance This link takes you to screens where you can perform firmware and configuration
file maintenance as well as reboot the system.
Access Control This link takes you to screens where you can change the system login password
and configure SNMP and remote management.
Diagnostic This link takes you to screens where you can view system logs and test port(s).
Syslog This link takes you to screens where you can setup system logs and a system log
server.
Cluster
Management
This link takes you to a screen where you can configure clustering management
and view its status.
MAC Table This link takes you to a screen where you can view the MAC addresses (and types)
of devices attached to what ports and VLAN IDs.
ARP Table This link takes you to a screen where you can view the MAC addresses – IP
address resolution table.
Configure Clone This link takes you to a screen where you can clone port attributes of a port and
transfer them to other port(s).
Table 5 Navigation Panel Links (continued)
LINK DESCRIPTION