ZyXEL Communications Omni 56K II - Manual (Page 73)

Omni 56K II and Omni 56K Plus II User’s Guide
Command Sets 5-27
COMMAND BIT DEC HEX FUNCTION AND DESCRIPTION REF.
1 1 Analog Loop-back test in progress &T1
3 3 Local Digital Loop-back test in process
6 6 Remote Digital Loop-back test in process
7 7 Remote Digital Loop-back with self-test in process
8 8 Analog Loop-back with self-test in progress. &T8
Bit dec hex Bit-mapped register. +022
4-1 0-30 0-1E Set transmit power level from 0 to -15 dBm. (See also
S35b3) (Default *P11) *Pn
5 0 0 Normal dial. (Default) D
S17=
32 20 Reverse dial, go online in answer mode. DR
dec hex Force modem to fix baud rate when answering +000
0 0 Disable fixed baud function
S18=
1-46 1-2E Enable baud rate to be fixed when answering. Baud
rate value settings (n) the same as S20.
S19= dec
0-99
hex
0-63 Modem connection mode, same setting value as
'AT&Nn' command. +000/&Nn
dec hex DTE speed (bps). Auto detected from AT Command +001
0 0 230400 bps
1 1 115200 bps (Default)
2 2 76800 bps
3 3 57600 bps
4 4 38400 bps
5 5 19200 bps
6 6 16800 bps
7 7 14400 bps
8 8 12000 bps
9 9 9600 bps
S20=
10 A 7200 bps