ZyXEL Communications Omni 56K II User Manual
Page 61
Omni 56K II and Omni 56K Plus II User’s Guide
Command Sets
5-15
COMMAND DESCRIPTION
VALUE
Minimum scan time/line: 10 ms (normal); 5 ms (fine).
st=2
Minimum scan time/line: 10 ms.
st=3
Minimum scan time/line: 20 ms (normal); 10ms (fine).
st=4
Minimum scan time/line: 20 ms.
st=5
Minimum scan time/line: 40 ms (normal); 20ms (fine).
st=6
Minimum scan time/line: 40 ms.
st=7
+FDCS=vr,br,wd,l
n,df,ec,bf,st
Current session parameters; refer to the +FDCC command.
+FDIS=vr,br,wd,l
n,df,ec,bf,st
Current session negotiation parameters; refer to the +FDCC command.
+FDR
This initiates document reception after receiving a phase C data command.
+FDT=df,vr,wd, ln Transmits a phase C data command: release the DCE to proceed with
negotiation.
+FET=n
End of page or document command:
More pages; same document.
n=0
End of document; another document follows.
n=1
No more pages or documents.
n=2
Procedure interrupt; another page follows.
n=4
Procedure interrupt; end of document, another document follows.
n=5
Procedure interrupt; end of document.
n=6
+FK
Regular fax abort command.
+FLID="string"
Local ID string parameter.
+FLO=n
Flow control options.
No flow control.
n=0
Set the XON/XOFF software flow control.
n=1
Set the CTS/RTS hardware flow control.
n=2
+FLPL=n
This command indicates the availability of documents for polling.
The DTE has no document available for polling.
n=0