ZyXEL Communications Omni 56K II - Manual (Page 57)

Omni 56K II and Omni 56K Plus II User’s Guide
Command Sets 5-11
5.2 Fax Command Sets
5.2.1 Service Class 1 Commands
Table 5-6 Service Class 1 Commands
COMMAND DESCRIPTION VALUE
+FCLASS=n Service Class Identification and Control n=0:Sets to modem mode
n=1:Sets to Class 1 mode
n=2.0:Sets to Class 2.0 mode
n=8:Sets to Voice mode
+FTS=n Stops data transmission and pauses n=0-255 in 10 ms units.
+FRS=n Wait for Silence n=0-255 in 10 ms units.
+FTM= Transmit Data with Carrier See Table 5-6
+FRM= Receive Data with Carrier See Table 5-6
+FTH=n Transmit HDLC Data with =3 Carrier n=3
+FRH=n Receive HDLC Data with =3 Carrier n=3
The value of parameters lists as below:
Table 5-7 The Value of Parameters
VALUE MODULATION SPEED
3 V.21 ch 2 300
24 V.27ter 2400
48 V.27ter 4800
72 V.29 7200
73 V.17 7200
74 V.17 short train 7200
96 V.29 9600
97 V.17 9600
98 V.17 short train 9600
121 V.17 12000