ZyXEL Communications Omni 56K II - Manual (Page 70)

Omni 56K II and Omni 56K Plus II User’s Guide
5-24 Command Sets
COMMAND FUNCTION OPTION DEFAULT DESCRIPTION
+VTD Set default duration of
DTMF tone. 1-255 100 Unit: 0.01 second.
+VIT Inactivity timer. 0-255 70 Unit: 0.1 second.
5.4 Voice Shielded DTE Commands
Table 5-13 Voice Shielded DTE Commands
COMMAND DESCRIPTION
p Pause, suspend voice data to the output device in playback state.
r Resume, resume suspended voice data in playback state.
Terminate voice playback state, switch to online voice command mode after
completing remaining data in buffer.
5.5 Voice Shielded DTE Responses
Table 5-14 Voice Shielded DTE Responses
RESPONSE CODE DESCRIPTION
0 - 9
A-D
*,#
DTMF digit detected
a Answer Tone detected
b Busy detected
c Calling Tone detected
d Dial tone detected
e European Data Modem Calling Tone detected
f Bell Answer Tone detected
h The local handset is on hook
s Silence detected
H The local handset is off hook